As an Amazon Associate I earn from qualifying purchases.
Graco is a well-known brand for producing quality baby strollers around the world. They are also an older brand trending with baby products for over a few decades. But most parents complain that maneuvering the Graco stroller is quite tricky.
However, most modern strollers can fold and unfold more easily with one tug. Fewer older models may need longer steps to fold and unfold. Since there are many stroller models, you can not open all of them using a single trick. Yet it is not as challenging as you think.
Once you nail the system, it will be super easy to fold and unfold the Graco stroller. Here we will describe to you some simple steps that make it easy for you.
- 1 How To Unfold A Graco Stroller
- 2 How To Fold Newer Graco Stroller Models?
- 3 How To Fold Older Graco Stroller Models?
- 4 Frequently Asked Questions (FAQ)
How To Unfold A Graco Stroller
Single strollers come with various versions like travel systems, full-size strollers, jogging strollers, etc. Here are the steps to unfold a single stroller:
Unfolding A Single Stroller
Graco has numerous stroller models that can be under single and double stroller categories. Firstly, we will guide you on how to unfold the Graco stroller.
Step 1: Place the stroller on the ground where wheels will touch the ground and the handle stated above.
Step 2: You will find a lock on the left-hand side of the stroller. You need to lift and release the lock to open the stroller.
Step 3: Clutch the handle to keep it in place. You need to use the button on the handlebar in an external area.
Step 4: Pull the handlebar up to make it unfold. You need to pull until you hear a clicking noise.
Step 5: In the middle of the stroller, you can notice a latch. you need to release the latch system on two sides. There is another latch attached to hold the stroller compacted together. It is helpful to carry around when traveling or not in use.
Step 6: Position your hand on the top of the tray and handlebar. Put some pressure on opposite sides. Until you hear a click sound you need to push. The clicking sound confirms that the stroller is locked and is ready to go.
Unfolding Double Stroller
A double stroller works well when your family grows and it can carry two children at a time. The features and benefits are the same as single strollers. Performs the steps to unfold a double stroller.
Step 1: Position the stroller on the floor as we did on the single stroller. The handle will be positioned upwards, and the wheel touching the floor.
Step 2: In the middle of the handlebar, you can see the latch. You need to release the top storage latch.
Step 3: Press the elliptic button placed on the handlebar and it helps to open the stroller.
Step 4: If you are using it for the first time you may see the stroller is inflexible. So apply decent pressure on the seat and handle simultaneously. You will hear a click sound when it is into the place. Then you can utilize it without any worry.
Unfolding Graco Newer Models
How to unfold a Graco Click-Connect
- Find the lever on the left. It can be beside the seat bars.
- When you open the lever, simultaneously hold the handle upward on the baby seat.
- Lift the handle towards you to open up easily and lift until a clicking sound.
- The click-connect stroller can be used with car seats.
- You can move the stroller seats towards you or the other way to back you.
How to unfold a Graco FastAction Fold Stroller
- Find a red strap located in the middle of the child’s seat.
- Simultaneously clutch the strap with one hand and at the same time hold the rear side with your other hand.
- Pull the straps and it will make the stroller open.
- Position the stroller on the ground to use.
Unfolding Older Model Graco Stroller
The older version requires more steps and time to open. Here are the steps to open older Graco models.
- Position the stroller’s brakes. You can use your leg to push down the latch closest attached to the wheel’s back. It will lick the wheels and won’t move.
- Also, lock the wheels from the front of the stroller and it won’t turn around.
- Upright the hood, then pull it and push it to close.
- To loosen up the seat backward, push it as you want. Some models need to unfasten the side lever first to set the stroller seat.
How To Fold Newer Graco Stroller Models?
Whether you have a click connection or a FastAction stroller the folding method is quite similar. Almost all near models have one of these features. If you follow the below steps you can quickly fold the stroller.
Step 1: Remove the car seat from the frame. Graco’s newer models don’t have seats of their own. Unstrap the car seat from the frame before unfolding the stroller frame.
Step 2: Disassemble the canopy that is placed over the seat. It should collapse back against the above handles after tugging the front end backward.
Step 3: Pull a strap placed at the hinge of the seat. Most models typically have a strap under a child seat.
Step 3: While folding the stroller outward the tray may lock into the position. So, remove the tray first to prevent falling onto the ground and getting dirty.
How To Fold Older Graco Stroller Models?
Older Graco stroller models need more force and time to fold. Following the below steps you can properly fold the older models.
Step 1: To set the brake, use your foot and push down the levels attached to the rear wheels. When the lever is at the lowest point it will lock the wheels and prevent wheels from moving.
Step 2: Now lock the front wheels. Here you can find a locking mechanism to prevent it from moving. When the front wheels are in forwarding position push down the small lever between the front wheels.
Step 3: To disassemble the canopy, tug gently on the canopy and pull it back in the folded position.
Step 4: Push the baby seat backward to sprawl the stroller as much as it goes. Some older models also have undone latches on the side of the seat.
Step 5: There is supposed to be a low handle. Find both the left and right sides of the stroller. It may be placed close to the seat base or wheels. Some models are easy to fold when the handle is tugged in the folding direction.
Step 6: Now fold the stroller together by pushing them back and seat simultaneously. Position the lower handle if there is one featured in the stroller. You can also tug the lower frame near the wheels for folding the frame.
Related post: How to fold and unfold BOB stroller
Frequently Asked Questions (FAQ)
How do you unfold a Graco jogging stroller?
You can unfold a Graco jogging stroller following our guide. First, you need to find out if your stroller has a click connect or FastAction feature. Then you need to proceed to our guide. Most modern jogging strollers can fold by some simple steps that we have detailed explained.
How do you open a Graco 2 in 1 stroller?
Firstly, position the stroller on a flat surface touching the wheels on the ground. Pull the handle by pressing a button placed on the outer sidebars of the handle and pulling the handlebar. Pull upwards until hearing a click sound. Free the latches on the sides of the stroller and it will be ready to use.
How do you open a Graco frame stroller?
You need to lift the tiny button on the sidebar. Then rotate the lever on the handlebar. It will open up the frame of the stroller.
Grace strollers have beneficial features. But there is no point if you can not fold and unfold the strollers. In this article, we have shared all the tips and tricks to fold and unfold the Graco strollers. Whether the model is, you can apply these guides. After one or two attempts if the method doesn’t work, then you need to search the maneuvering system for the specific models.
The older Graco strollers need slightly more effort. But you will be used to it after doing the process two or three times. When the older stroller becomes rusty or dirty, it may take more time to fold and unfold. Carefully tackle this issue, otherwise, call a mechanic.
As an Amazon Associate I earn from qualifying purchases.